VanTento Triangle

The Triangle can be connected to the vehicle using the piping adapter or simply attached to the Square or another Triangle using the included connector. The Triangle is a right-angled triangle with two 2.13m long edges.

The Triangle can be set up with any conventional tent poles.

The tarp is water repellent according to ISO4920, value 4. In light to
The tarp is waterproof in moderate rain. Some water can seep through the seam.

Oekotex Standard 100

Scope of delivery: Tarp 2.13x213m edge length + 1x connector

You will need a piping adapter if a vehicle mounting
is provided, and at least one tent pole, ropes and pegs for setting up the tarp.

To ensure sufficient storm protection, the VanTento elements are connected to each other using the Velcro connector.

In addition, the elements are secured to the left and right of the piping using the rubber bands provided. Piping stones or strong magnets are ideal for this on the vehicle side. This prevents the tarp from being pulled out of the plastic piping in the event of high wind loads, for example.

Storm-proof telescopic aluminum poles with quick-release fasteners. The poles are entirely manufactured in Germany.

The rod consists of a horizontal rod and two vertical rods.

Height adjustment: 1500mm-2100mm

Horizontal pole: 2000mm-2300mm (for the front of the VanTento Square).

The VanTento system consists of triangles and squares. The elements are designed so that when combined, the eyelets of the elements lie on top of each other. In addition, the elements are connected with the Velcro connector.