VanTento Square

The Square provides a good basis for the modular tarp system. With an edge length of 2.13m, the Square can be easily connected to the vehicle using our piping adapters.

The Square can be set up with any conventional tent poles. Additionally, a crossbar can be inserted at the front to ensure more stability.

The tarp is water-repellent according to ISO4920, value 4. The tarp is waterproof in light to moderate rain. Some water can seep through the seam.

Oekotex Standard 100

Scope of delivery: Tarp 2.13x213m, 2x rubber ropes for attachment to piping stones.

Color: Gray

You will also need a piping adapter, at least two tent poles, ropes and ground pegs to set up the tarp. Optionally, a cross pole.

To ensure sufficient storm protection, the VanTento elements are connected to each other using the Velcro connector.

In addition, the elements are secured to the left and right of the piping using the rubber bands provided. Piping stones or strong magnets are ideal for this on the vehicle side. This prevents the tarp from being pulled out of the plastic piping in the event of high wind loads, for example.

Storm-proof telescopic aluminum poles with quick-release fasteners. The poles are entirely manufactured in Germany.

The rod consists of a horizontal rod and two vertical rods.

Height adjustment: 1500mm-2100mm

Horizontal pole: 2000mm-2300mm (for the front of the VanTento Square).

The VanTento system consists of triangles and squares. The elements are designed so that when combined, the eyelets of the elements lie on top of each other. In addition, the elements are connected with the Velcro connector.