StickIt - ClickOn holder for sticking (2x)

The adhesive system that requires a minimal adhesive surface. Suitable for all plastic surfaces in the camping area. A 50mm wide adhesive strip is glued on with special hooks (no Velcro). The small base plate can be attached to this, which has a fleece sewn onto the back (two strips of 20mm each). This makes it possible to correct even if the adhesive tape is stuck on crookedly with the base. Depending on the version, you have one or two ClickOn points at your disposal. If once the baseplate has been attached, there is no longer any "hook band" exposed.

A notice:

The bond between adhesive strip and fleece can be used several hundred times
Nevertheless, it is designed as a permanent connection.

Dimensions:

Single point: 13x15.5cm

Double holder: 26x 20cm

One ClickOn point:

You can choose all bags from the organizer system that are attached with a ClickOn point, e.g. the Washbag, Pocket S.

Additionally, you can attach the slightly larger Bag S to the individual point.

Two ClickOn points:

All bags from the organizer system fit here. Two individual bags can also be hung next to each other using a ClickOn point.

Note: Two Bag S do not fit next to each other at the two ClickOn points. The Bag S has a special size.

Details about the textile closure:

Not suitable for permanent opening and closing. No Velcro! Since it is not a Velcro connection, most items of clothing do not stick to the adhesive tape. Pure wool or knitted fabrics can, however, pull threads. The adhesive tape is therefore permanently covered and the textile fastener can no longer be opened.

Fastener: Polypropylene

Temperature range: -30°C-80°C

Strengths (average):

Peel strength: 3.5 N/cm

Shear strength: 35 N/cm2

Adhesive strength: 16.5N/cm2

Details about the adhesive:

Elastic acrylic adhesive with slowly increasing adhesive bond. The adhesive strength increases with age. Adhesion to almost all plastics.

Peel strength approx. 15N/cm

Shear strength: approx. 60 N/cm2

(Values based on DIN 16484)

Temperature range -30°C to max. 150°C (short-term and dependent on the substrate). Weather and water resistant, tested according to SKM-3G 9512-A.

Installation instructions: Please clean the adhesive surface carefully and wait 12 hours after applying the adhesive strip before applying any load to the adhesive.
Do not stick on below 10°C.

Click here to watch the video: StickIt

Hersteller: Felleisen GmbH, Falkenstr. 12, 91154 Roth
Kontakt: www.felleisen.com, info@felleisen.com
Sicherheitshinweise:

- nicht für Kinder unter drei Jahren geeignet
- Produkt enthält Kleinteile, welche verschluckt werden können
- Quetschgefahr bei der Montage oder beim Umgang mit Magneten
- Maximale Belastung 2 kg
- Bitte beachten Sie die allgemeinen Sicherheits- und Produkthinweise auf unserer Website

- Produkt kann Magente enthalten die elektronische Geräte, Magnetstreifen, auch Herzschrittmacher und icd-Produkte oder andere medizinische Geräte stören können.